Patron Companies

Patron Companies are businesses that are members of FET through the Patron Company membership level.

We appreciate the support and affiliation of these FET Patron Companies (as of 3/13/19).

AECOM
Alliant Energy
ALS Environmental
AP Environmental, Inc
Applied Science, Inc
Appvion, Inc
Baker Manufacturing Co
Balestrieri Environmental & Development
Barton Solvents, Inc
Bay Environmental Strategies
Bemis Co., Inc
Brenntag Great Lakes LLC
Briggs & Stratton Corp
Burns & McDonnell
Cardinal Environmental
Charter Manufacturing
Covanta Environmental Solutions
Deigan & Associates, LLC
Enviro-Safe Resource Recovery
ERM, Inc
Fehr-Graham
Foremost Farms USA
Foth Infrastructure & Environment
Gannett Fleming, Inc
Golder Associates
Great Lakes Power Vac
Green Bay Packaging Inc
GZA GeoEnvironmental, Inc
Hi-Crush Proppants, LLC
Hydrite Chemical
InSinkErator
Institute of Hazardous Materials Management
ITU AbsorbTech, Inc
J.J. Keller & Associates
Kohler Company
Madison Gas & Electric Co
Master Lock Company
Mercury Marine
Meverden Environmental, Inc
Michael Best & Freidrich
Michels Corporation
Millipore Sigma/SAFC Inc
North Shore Environmental Construction
O’Brien & Gere
Oshkosh Corporation
Plastics Engineering Co
Procter & Gamble
Quad/Graphics, Inc
Ramboll US Corporation
REI Engineering, Inc
River’s Bend Engineering, Inc
Rockwell Automation
S.C. Johnson & Son, Inc
Saueressig
SCS Engineers
Seneca Foods Corporation
SET Environmental Inc
Short Elliott Hendrickson, Inc
Snap-On Tools Inc
Spectrum Engineering, Inc
SSI Technologies
Stantec Consulting Services
Strattec Security Corporation
Symbiont Science, Engineering and Construction, Inc.
The Sigma Group
TRC Environmental Corp
Trinity Consultants
True North Consultants, Inc
U.S. Venture, Inc
Veolia North America
Voestalpine Precision Strip LLC
Waste Management of Wisconsin
Water Integrated Treatment Systems, LLC
WEC Energy Group
Wenck

For more information on becoming a Patron Company member of FET, contact Julie at juliejansett@fetinc.org. FET also has individual membership options available.

FET

	May 2019
			1	2	3	4
5	6	7 NEWI Chapter Meeting/Tour NEWI Chapter Meeting/Tour May 7, 2019 @ 1:00 pm - 3:00 pm Outagamie County Recycling & Solid Waste Drop Off Site, 1919 Holland Rd, Appleton, WI 54911, USA Join the NE WI Chapter on for a tour of the recycling center at Outagamie County, 1419 Holland Rd, Appleton, WI; follow the signs for tours. Earplugs and safety glasses will be provided; participants must wear closed toe low heeled footwear. RSVP to Julie at julie@fetinc.org Note that the tour is limited to the first 40 people. See more details •	8	9	10	11
12	13	14	15 RCRA Refresher RCRA Refresher May 15, 2019 @ 7:30 am - 3:30 pm Hilton Garden Inn Milwaukee Park Place, 11600 W Park Pl, Milwaukee, WI 53224, USA The Hazardous Waste Training Seminar is designed to satisfy the 40 CFR 264/265.16 (NR664/665.0016) Personnel Training Requirements, in conjunction with site-specific training. Certificates of attendance will be given. See more details •	16	17	18
19	20	21	22	23	24	25
26	27 FET Office Closed FET Office Closed May 27, 2019 See more details •	28	29	30	31

Members Say It Best!

“Good changes for FET are the growing membership, and also providing more educational opportunities to meet changes by the DNR, EPA and OSHA.”

Mary Ellen Mortensen

- Earlier this year, FET received information from a new college grad who had been encouraged to join FET by someone at Johnson Controls, as FET is seen as a great networking and educational association.

“I sat for the CHMM exam in Madison. . . I must say this was a difficult exam, however if you paid attention in the FET 3-day prep course, if you focus on the intent of the regulations and can memorize many of the acronyms used in waste regulations and agencies, you should do just fine. I'm pleased to announce I passed the exam!”

Jason Smith

I joined FET to expand my environmental knowledge in addition to the solid and hazardous waste information I already knew - to learn the “environmental craft.” I was also interested in building a professional network, and FET continues to serve me well in these areas. It has been worth every penny of dues I’ve paid all these years.

Don Johnston

"The value of membership goes beyond just learning the regulations and compliance issues. The networking is wonderful. Every consultant or service that my company hires has been through contacts at FET whenever possible."

Lori Schneider

The Regulators are available for questions - I learned a lot in a short period of time.

Conference Attendee

“All of the sessions were well done. It is always difficult to make this material interesting when you have gone through this over and over. Everyone did a great job and I enjoyed the interactive training.”

Seminar attendee at HazWoper Refresher course

“Chapters are a great benefit of FET -- to have a good pool of people to stay connected to and interact with other peers who are helpful in the sharing of ideas.”

Jay Gasser

"The conferences continue to be relevant, and a great value. In just a few days, one can have the information presented in a condensed format, and be relevant to our state. It is very cost-effective and justifiable to an employer.”

Brenda Kubasik

The most rewarding aspects are interacting with younger people entering the field, and learning new perspectives to previous challenges. Throughout the years the one constant of FET is the people and the enthusiasm for sharing their professional knowledge and advice.

Bill Fowler

“FET seminars, courses and the annual conference are timely and current. I like that most are one-day, convenient and cost effective. When I travel to Pennsylvania and Minnesota, my colleagues there are amazed at how many FET events I attend ~ they do not have an equivalent of FET in their states.”

Sue Murawski

“There are excellent people affiliated with FET. It is a nice mix of newer and long time members. The sharing of knowledge amongst members to enhance knowledge of other members in this field is the best; FET membership is a real value.”

Tariq Akmut

“FET helps provide a reality check on the tools we use when explaining rules or policy. The membership provides a very good resource to interact with practitioners in the environmental field, and know what their issues and concerns are. I see it as an important communications conduit for state information to be shared.”

Renee Lesjak Bashel

“FET is an excellent way to interact with people in the environmental field. Also, the annual conferences are very good.”

Sue Gau

“Seminar was excellent. Good inclusion of detail, state-specific items and technologies; subject matter is very useful.”

Troy Stucke, on RCRA Seminar

I enjoy attending FET trainings, they help to keep me current, and put me back on track when I'm feeling a little sluggish in my field

Member Survey Respondent

“Even as a veteran in this field, the education and networking focus of FET continue to be significant.”

Steve Keith

“I enjoy interacting with other professionals in the industry and learning from their experiences and receiving feedback on relevant issues we face in our disciplines.”

Ryan Stewart

“The organization is very focused on ensuring that members are well-trained and up-to-date on environmental rules and regulations. There are a lot of training opportunities – especially for younger workers in this field.”

Jeanne Tarvin

“I initially joined FET in 2015 to make connections with other industries in the environmental field; it was a chance to educate and be educated about many different businesses.”

Emily Jones

Patron Companies

Join FET on Social Media

FET

May 2019

We are grateful for the support of the following companies – to be listed here, contact FET.

FET News

Sample Newsletter

Members Say It Best!

Search FET Site